Materials and Tools Needed Tools: NanoBlade Saw, Jigsaw, Multi-Sander, Cordless Tacker, Paint Spray System, Cordless Combi Drill. Materials: Wooden slats (8-12 pieces), 2 ribbons or packaging tape, 2 door hooks, hooks or containers for hanging.

Materials and Tools Needed

• Tools: NanoBlade Saw, Jigsaw, Multi-Sander, Cordless Tacker, Paint Spray System, Cordless Combi Drill.
• Materials: Wooden slats (8-12 pieces), 2 ribbons or packaging tape, 2 door hooks, hooks or containers for hanging.

Step-by-Step Instructions

Step 1: Measure and Cut the Wooden Slats

• Use a tape measure and set square to mark slats at the desired length (60 cm recommended).
• Secure the slats and cut using a NanoBlade saw or jigsaw.

Step 2: Sand the Slats for a Smooth Finish

• Use a multi-sander with G120 sanding paper to smoothen the slats and ensure paint adheres well.

Step 3: Paint the Slats

Rack

• Thin paint as required, and use a paint spray system for an even coat.
• Allow the slats to dry completely before assembly.

Step 4: Assemble the Rack with Ribbons

• Lay out slats 6 cm apart. Staple the ribbons to the back, evenly spaced at 7 cm from the edges.

Step 5: Hang and Decorate

Use door hooks to mount the rack or wall hooks for secure mounting.

• Add hangers, baskets, or hooks for storage.